Recording Still Images On A Memory Card - Canon MVX150i Instruction Manual

5_D74PAL_E(100-138)

Recording Still Images on a Memory Card

You can record still images with the
E
camcorder, from a tape in the camcorder
( 107) or from devices connected via the
DV terminal or AV terminal (
❍ Do not turn off the camcorder, disconnect the power source or remove the
❍ When you are using a SD Memory Card, make sure that the protect switch is
Make sure to insert a memory card with enough remaining capacity.
Recording with the Camcorder
In autofocus mode, the camcorder keeps focusing automatically. Furthermore, this
camcorder is equipped with the Focus-Priority mode for even more accurate focus. In
Focus-Priority mode, you can choose between three focusing points (
However, you can turn off the Focus-Priority mode if you wish to put timing ahead of
focusing (
When the program selector is set to
center focusing point available).
CAMERA
1. Set the camcorder to CARD CAMERA mode.
A white focusing frame appears in the centre of the screen. The camcorder will focus on
the subject in the centre of the screen. To change the focusing point, see Selecting a
Focusing Point (
2. Press the PHOTO button halfway.
• F and focusing frame turn green when focus is adjusted. The
beep sounds twice. The picture may appear out of focus for a
moment while the camcorder is focusing.
• Exposure is locked.
• Focus can be adjusted manually with the focus ring when the PHOTO button is pressed
halfway.
• When you press the PHOTO button on the wireless controller, recording starts immediately.
104
Downloaded From CamcorderManual.com Canon Manuals
03.2.3 2:14 PM
108).
memory card while the card access display (<<< or >>>) in the upper right
corner of the screen or the card access indicator is flashing. Doing so could
result in data damage.
set to allow recording.
106).
PLAY (VCR)
105).
Page 104
Card access
indicator
[, the Focus-Priority mode is set to ON (only the
CARD CAMERA
PHOTO button
105).
CARD PLAY (VCR)