Basic Recording - Canon elura10 Instruction Manual

Basic Recording

E
3
P
Before you start recording
Have you completed the following steps?
• Attached a power source (
• Removed the lens cap (
• Chosen the display: viewfinder (
• Extended the viewfinder (
• When you're using the viewfinder, fully close the LCD or rotate the LCD so
that it faces the same direction as the lens (
You may also want to install the backup battery (
and time display (
To record
1. Press the button next to the POWER dial and hold, turn the
POWER dial to MOVIE.
• The camera automatically sets to record pause mode. PAUSE appears in the
display.
• The camera power indicator lights up red.
• The confirmation beep sounds.
• The camera will turn itself off if you leave it in record pause mode for more
than about 5 minutes. To return to record pause mode, turn the POWER dial
to OFF and then back to MOVIE.
• For Progressive Scan recording, see p. 49.
ELURA20 MC only: For still image recording to a memory card, see p. 94.
2. Load a cassette (
16
11).
121).
121) or LCD screen (
121) /adjusted the LCD screen (
46).
14).
1
MOVIE
4, 5
22)
22)
24).
124) in order to set the date