Dubbing To/From A Cassette With Digital Video Equipment - Canon elura10 Instruction Manual

Dubbing to/from a Cassette with Digital Video Equipment

Digital video equipment fitted with the DV terminal lets you edit, copy and
transfer data digitally, with virtually no generation loss in image and sound
quality. The DV terminal is for both line-in and line-out, since a single DV cable
can handle data in both directions.
• If a digital VCR is connected and an anomalous signal is sent from the VCR,
the images recorded on the tape may also be anomalous (although it may not
appear so on the TV image), or not recorded at all.
• You are unable to dub tapes recorded with the copyright protective signal.
REC PAUSE
(LINE-IN)
Side with arrow
Preparations
Example dubbing to the camera
1. Connect the camera and the other digital device.
• Connect the Canon CV-150F DV cable (optional) with the sides of the plugs
marked with the arrows facing as shown above.
2. Prepare the other device.
• Turn on the power and load a recorded cassette.
3. Turn the camera's POWER dial to VCR and load a blank cassette.
• DV IN appears in the display.
ON/
OFF
REC SEARCH D.EFFECTS
Side with arrow
: Signal flow
REC
PAUSE
ZERO SET SEARCH
SELECT
MEMORY
AUDIO
FF
REW PLAY
DUB.
A/V
– / STOP + /
INSERT
× 2
REMOTE PAUSE SLOW
E
81