Recording Still Images On A Memory Card - Canon ZR600 Instruction Manual

Recording Still Images
on a
Memory
Card
You can record still images with the camcorder or record as still images scenes from a
video recording on the tape or from an external video signal from the DV terminal
(~
only: also from the AV terminal). You can also record a still image on the
memory card while you record a movie on the tape.
l:l
~
<l:
CARD access indicator
~
/u
a
~.......",.=-~-0--
PHOTO button
~
-I~ ~
c
\
~t.~
> ••
0>~>~
~
-\'0
/
84
1. Set the camcorder to
tQ~IVIEBI~Od)
mode.
2. Open the lens cover {move the lens cover switch down to
($ ).
3. Press the PHOTO button halfway.
~
·
:;~:~:.~~:~::;::~~~:.iS
adjusted and a green frame \
~t~~
• When you press the PHOTO button on the wireless controller,
~
-\
'0
recording starts immediately. L-.-....:../ ----'
4. Press the PHOTO button fully.
• 0 and the focusing frame disappear and you hear a shutter
sound.
• The CARD access indicator flashes and the card access
display appears.
• The still image shown on the screen will be recorded on the memory card.
o
Do not turn off the camcorder, change the position of the TAPE/CARD switch,
disconnect the power source, open the memory card cover or remove the
memory card while the CARD access indicator is flashing. Doing so could result
in data damage.
o
When you are using an
SO
Memory Card, make sure that the protect switch is
set to allow recording.