Canon elura10 Instruction Manual page 59

● Faders
Fade Trigger (FADE-T)
When you start recording, the scene
gradually fades in from a black screen.
When you stop recording, it gradually
fades out.
Wipe (WIPE)
When you start recording, the picture
begins as a thin vertical line in the
center of the screen which gradually
expands sideways until it fills the
whole of the screen. When you end a
scene, the image is wiped from both
sides of the screen.
Scroll (SCROLL)
When you start recording the picture
appears from the right hand side of the
screen and expands sideways until it
fills the whole screen. When you end a
scene, the image is wiped back off.
Mosaic Fade (M. FADE)
Blurs the image by enlarging the size of
some pixels. The image appears as
increasingly large squares of color as it
fades out, and smaller squares when it
fades in.
*Available during VCR mode only
*
E
59