Audio Dubbing
You can add sound either from external audio devices (AUDIO IN) or with the built-in or
an external microphone (MIC. IN).
This function is operated with the wireless controller.
Connecting an Audio Device
Refer also to the instruction manual of the connected device.
Audio device
(e.g. CD player)
OUTPUT
L
AUDIO
R R
Dubbing
Available only in the
MENU
(
64)
1. Load a recorded cassette.
Use a tape recorded in SP, 12-bit mode with this camcorder.
2. Select (
(
) the [AUDIO DUB.] option and press (
3. Set it to [AUDIO IN] or [MIC.IN] and press (
then close the menu.
4. Locate the scene you wish to start audio dubbing.
5. Press the PAUSE
6. Press the AUDIO DUB. button on the wireless controller.
"AUDIO DUB." and "
7. Press the PAUSE
dubbing.
• Microphone: Speak into the microphone.
• Audio device: Begin playback.
8. Press the STOP
Audio device: Stop playback.
94
STV-250N Stereo Video Cable
(supplied)
mode.
AUDIO SETUP
) the [AUDIO SETUP] menu and press (
button on the wireless controller.
" appear.
button on the wireless controller to begin
button on the wireless controller to stop dubbing.
Signal flow
Open the terminal cover
AUDIO DUB. AUDIO IN
).
) to save the changes,
). Then, select