Converting Analog Signals Into Digital Signals (Analog-Digital Converter) - Canon Elura 100 Instruction Manual

Converting Analog Signals into Digital
Signals (Analog-Digital Converter)
By connecting the camcorder to a VCR or 8mm video camcorder, you can convert analog
video/audio signals to digital signals and output the digital signals via the DV terminal.
The DV terminal serves as output terminal only.
Connecting the Devices
Turn off all devices before starting the connections. Unload the tape from the camcorder.
Check the type and orientation of the DV terminal and make sure you connect the DV
cable properly. Refer also to the instruction manual of the connected device.
Open the terminal cover
92
Signal flow
STV-250N Stereo
Video Cable (supplied)
Signal flow
Commercially available DV cable
Open the LCD panel
VIDEO
L
AUDIO
R
Digital video device
INPUT