Step 1: Preparing The Power Supply - Canon Elura 100 Instruction Manual

Step 1: Preparing the Power Supply

Preparation
The camcorder can be powered by a battery pack or be connected to a household power
source. Charge the battery pack before use.
Attaching the Battery Pack
1. Turn the
2. Open the LCD panel.
3. Attach the battery pack to the
camcorder.
• Remove the terminal cover of the
battery pack.
• Slide in the connector end of the battery
in the direction of the arrow and press it
gently until it clicks.
To remove the battery pack:
1. Open the LCD panel.
2. Hold down the BATTERY
RELEASE button and pull out the
battery from the ridge on its
bottom part.
Charging the Battery Pack
1. Connect the power cord to the
adapter.
2. Plug the power cord into a power
outlet.
3. Open the front terminal cover and
connect the power adapter to the
camcorder's DC IN terminal.
The CHARGE indicator starts flashing.
The indicator will stay on when the
charging is completed.
To remove the power adapter:
1. Disconnect the power adapter
from the camcorder.
2. Unplug the power cord from the
power outlet.
3. Disconnect the power cord from the adapter.
16
switch to .
BATTERY RELEASE
button
CHARGE indicator
DC IN terminal