End Search - Canon Elura 100 Instruction Manual

End Search

When you have played back a tape, you can use this function to locate the end of the last
recorded scene.
Available only in the
In stop mode:
1. Open the FUNC. menu, select (
( ).
2. Select ( ) [EXECUTE] and press (
• "END SEARCH" appears.
• The camcorder rewinds/fast forwards the tape, plays back the last few seconds of
the recording and stops the tape.
• Operating the joystick (
End search cannot be used once you unload the cassette.
If there are blank sections between recordings or sections recorded in different
recording modes on the same tape, the end search function may not work
properly.
You cannot use end search to locate the editing end of audio dubbing.
mode.
) the end search icon
) to start the search.
, ) will cancel the search.
Joystick
FUNC. button
and press
73
E