Setting The White Balance - Canon Elura 100 Instruction Manual

Setting the White Balance

You can use the preset modes to reproduce colors more accurately, or set a custom white
balance to obtain the optimal setting.
AUTO
DAYLIGHT
TUNGSTEN
SET
Joystick
FUNC. button
Mode switch
Available only in the
( 54)
1. Set the mode switch to
2. Press the FUNC. button to open the FUNC. menu.
3. With the joystick select (
4. Select (
bar.
If you select a white balance setting other than
To set the custom white balance when you select
5. Point the camcorder at a white object, zoom in until it fills the whole
screen and press (
• Keep the camcorder zoomed at the white object until step 6 is completed.
• " " flashes and stops flashing when the adjustment is completed.
6. Press the FUNC. button to save the setting and close the menu.
56
Settings are automatically set by the camcorder.
For recording outdoors on a bright day.
For recording under tungsten and tungsten type (3-wavelength)
fluorescent lighting.
Use the custom white balance setting to make white subjects
appear white under colored lighting.
Zoom lever
and
AUTO
.
) the white balance setting from the options on the bottom
).
modes.
) the white balance icon.
[SET], continue directly to step 6.
[SET]:
White sheet or paper
(if you select SET)