Adjusting The Height Of Cut - Toro 2000 Series Operator's Manual

Figure 27

Adjusting the Height of Cut

Using the Transport Lock
The transport lock has 2 positions, and is used with
the deck-lift pedal. There is a L
an U position for the transport position of the
NLOCK
mower deck (Figure
g008953
1. Transport lock knob
2. L position—The
OCK
mower deck locks into the
transport position.
27
position and
OCK
28).
Figure 28
Transport-Lock Positions
3. U
NLOCK
mower deck does not lock
into the transport position.
g037050
position—The