Product Overview; Controls - Toro 2000 Series Operator's Manual

Product Overview

1. Height-of-cut deck-lift
pedal
2. Height-of-cut positions
3. Transport lock

4. Controls

5. Motion-control levers
6. Roll bar
Figure 4
7. Shock assembly
8. Fuel cap
9. Parking-brake lever
10. Mower deck
11. Caster wheel
Controls
Become familiar with all the controls before you start
the engine and operate the machine.
Control Panel
1. Position for optional power
point
2. Choke control
3. Throttle control
4. Hour meter
g327985
Key Switch
The key switch, used to start and shut off the engine,
has 3 positions: O
Starting the Engine (page
Choke Control
Use the choke control to start a cold engine.
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from the S
position (Figure
12
Figure 5
5. Blade-control switch
(power takeoff)
6. Key switch
7. Switch position for optional
light kit
, R , and S . Refer to
FF UN TART
25).
LOW
5).
g271171
to F
AST