Page 1
AQ-BC-6BT-X BLUECUBE ‘HIDE-AWAY’ MEDIA PLAYER for Bluetooth Audio & MP3 devices USER / INSTALLATION MANUAL BRIDGE M O D E PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION...
Table of Contents BlueCube Media Player AQ-BC-6BT-X 1 Getting Started........................1.1 Contents........................1.2 Connections........................1.3 12-pin Harness Connection................... 1.4 Mounting the BlueCube Media Player................1.5 Bluetooth Antenna Installation..................1.6 Power Attenuation Wires....................1.7 Bridge Mode........................1.8 Power On........................1.9 Handheld Remote Control Charging................
Allows the left and right rear channels to be used to power a standard passive subwoofer (e.g. AQ-SWP8-2) instead of speakers. See section 1.7 for further details. Aquatic AV does not recommend the Wired Remote Control for use in spa applications. www.aquaticav.com...
If your AQ-BC-6BT-X was purchased from an Aquatic AV dealer and/or supplied with retail packaging it is supplied with the Aquatic AV universal harness AQ-UNH-2 in order to connect the media player to power and speakers. Please proceed to section 1.3.1.
If there is no suitable surface to screw it in, we recommend using a good quality double sided tape. 1.6 Power Attenuation Wires The AQ-BC-6BT-X Bluecube Media Player’s Black Wire White Wire Output Level power can be reduced or increased to suit...
The AQ-BC-6BT-X requires +12V DC to both the red and yellow wires. When both of these wires have power the AQ-BC-6BT-X is always powered on, indicated by a red LED on the heatsink of the media player. Ground is connected to the black wire.
Getting Started BlueCube Media Player AQ-BC-6BT-X 1.9 Handheld Remote Control Charging The optional remote AQ-RF-6UBT (sold separately) has a built-in Polymer Lithium recharge- able battery and comes with a charging cable. Connect one end of the charging cable to the charging connection on remote control and connect the USB end of the charging cable to any USB charger (5V DC) for charging.
3.1.1 Pair with Bluetooth Audio Device 1. Switch on your Bluetooth Audio device. 2. Select ‘AQUATIC AV’ from the list of available devices to pair (no password is needed). 3.1.2 Listening via Bluetooth Audio Device 1. Bluetooth Audio mode will be activated once a Bluetooth Audio device is paired in any mode.
If using two external trigger wires you can also activate the second external trigger by pressing and holding the 12V TRIGGER button to activate. Press and hold again to deactivate. Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are considering using this feature.
Specifications & Dimensions BlueCube Media Player AQ-BC-6BT-X 5.1 Specifications Media Supported media........Bluetooth Audio / MP3 / AUX Device Control........via Handheld RF Remote Control or Wired Remote Control (both sold separately) Inputs Auxiliary..........1x stereo pair RCA Outputs Pre-Out..........
Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV.
Page 13
FCC Statement BlueCube Media Player AQ-BC-6BT-X FCC ID: MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 14
Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.com...