Page 1
AQ-BC-6UBT BLUECUBE + ‘HIDE-AWAY’ MEDIA PLAYER for Bluetooth, USB, Apple iOS, Android, MP3 devices and FM Radio USER / INSTALLATION MANUAL PLEASE READ THIS INSTRUCTION MANUAL BEFORE INSTALLATION AND OPERATION...
Table of Contents BlueCube+ Media Player AQ-BC-6UBT 1 Getting Started........................1.1 Contents........................1.2 Connections........................1.3 12-pin Harness Connection................... 1.4 Mounting the BlueCube+ Media Player................1.5 Bluetooth Antenna Installation..................1.6 Power Attenuation Wires....................1.7 Power On........................1.8 Handheld Remote Control Charging................
(do not use a wrench). See section 1.5. 11. Power Attenuation Wires The AQ-BC-6UBT power has been factory set to -3dB of maximum power to avoid blowing very small speakers used spa applications. See section 1.6 for further details.
Bluetooth Halo Aerial Connector 1.3 12-pin Harness Connection The AQ-BC-6UBT includes the universal harness AQ-UNH-2 in order to connect the stereo to power and speakers. All open wire connections should be soldered and protected against water and dust for best long- term performance.
If there is no suitable surface to screw it in, we recommend using a good quality double sided tape. 1.6 Power Attenuation Wires The AQ-BC-6UBT Bluecube+ stereo’s power Black Wire White Wire Output Level is set to -3dB of the maximum power to...
The AQ-BC-6UBT requires +12V DC to both the red and yellow wires. When both of these wires have power the AQ-BC-6UBT is always powered on, indicated by a red LED on the heatsink of the stereo. Ground is connected to the black wire.
The USB socket can deliver 1A of current to charge a device battery. 3.2 Listening via Bluetooth 3.2.1 Pair with Bluetooth Device 1. Switch on your Bluetooth device. 2. Select ‘AQUATIC AV’ from the list of available devices to pair (no password is needed). www.aquaticav.com...
Listening to Devices BlueCube+ Media Player AQ-BC-6UBT 3.2.2 Listening via Bluetooth Device 1. Bluetooth mode will be activated once a Bluetooth device is paired in any mode. Use MODE to change to the Bluetooth mode to listen to music. 2. Play the song from device and the sound will play through the BlueCube+ Media Player.
Listening to FM Radio BlueCube+ Media Player AQ-BC-6UBT 4.1 Enter FM Radio Mode 1. Press MODE on the remote control to switch to FM radio mode. 2. Press PLAY/PAUSE to mute or unmute the audio. If this is the first time you listen to FM radio, the default frequency will be 87.5MHz, as shown on the remote LCD.
If using two external trigger wires you can also activate the second external trigger by pressing and holding the 12V TRIGGER button to activate. Press and hold again to deactivate. Aquatic AV strongly recommend you speak to our technical service staff or your local Aquatic AV dealer if you are considering using this feature.
Position 86: position 86 is triggered 12V, and is sent when your stereo is powered on. For Aquatic AV stereos position 86 can be connected to either the blue remote wire in the harness or the brown 12V trigger on the rear of the unit. The differences are below: Blue (recommended): The blue (remote wire) provides a 12VDC output when the stereo is pow- ered on.
Specifications & Dimensions BlueCube+ Media Player AQ-BC-6UBT 6.1 Specifications Media Supported media........Bluetooth / USB / Apple iOS / Android /MP3 / FM / AUX Device charging........via USB Device Control........via Handheld RF Remote Control (included) or Wired Remote Control (sold separately) Remote Charging........
Some states do not allow limitations on the length of an implied warranty, so this limitation may not apply. No person is authorized to assume for Aquatic AV any other liability in connection with the sale of the product. How to obtain service You must obtain a return material authorization number (RMA) to return any product to Aquatic AV.
Page 15
FCC Statement BlueCube+ Media Player AQ-BC-6UBT FCC ID: MADE IN CHINA This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Page 16
Aquatic AV 282 Kinney Drive San Jose, CA 95112, USA E-mail: info@aquaticav.com US & Canada: 1 877 579 2782 International: +1 408 559 1668 Fax: +1 408 559 0125 www.aquaticav.com...