Download Print this page

Mocka Sadie Four Drawer Assembly Instructions Manual

Advertisement

Quick Links

Sadie Four Drawer
Assembly Instructions
Thank you for your purchase.
Please follow the instructions below for correct assembly.
A
B
C
screw
bolt
dowel
x8
x30
x54
H
I
J
slide
wedge
slide
rail x4
rail x4
x8
WARNING:
Any furniture that is not anchored to a wall has the potential to tip over in certain
circumstances, i.e. if a child attempts to climb up on the furniture or in the event of an earthquake.
Accordingly, we recommend that all furniture is anchored to a wall. We supply a free safety wall anchor
with all furniture sold and we recommend these are used to prevent your product tipping. The fixing device
provided should fit most wall types, but please note that different wall materials may require different fixing
devices from those supplied.
mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558
D
E
locking
screw
x48
nut x54
K
L
screw
screw
x8
x16
key x1
Hardware Supplied
Phillips & Flathead screwdrivers
and hammer required
For quicker assembly, we recommend the
use of a power drill on a low-speed setting.
F
G
slide
slide
rail x4
rail x4
M
N
Allen
plastic
glide x4
V
W
X
safety
screw
wall
x1
strap x1
anchor
x1
Wall Strap
Y
Z
wall
washer
screw
x2
x1
1

Advertisement

loading
Need help?

Need help?

Do you have a question about the Sadie Four Drawer and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for Mocka Sadie Four Drawer

  • Page 1 Phillips & Flathead screwdrivers and hammer required For quicker assembly, we recommend the use of a power drill on a low-speed setting. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 2 Attach 4x slide rails (F) and 4x slide rails (G) to panels [3] Insert 12x bolts (C) into panels [3] and [4]. Tighten with and [4] as shown with 24x screws (E). Tighten with a screwdriver. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 3 Attach panels [5] and [6] to panel [4] with 5x dowels (A) Insert 2x bolts (C) into panels [7] and [8]. Tighten with and secure with 5x locking nuts (D).Tighten with a screwdriver. a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 4 Attach panel [9] to panels [7] and [8] with 4x dowels (A) and secure with 4x screws (B). Tighten with a screwdriver. secure with 2x locking nuts (D). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 5 Attach panels [10] to panel [4], then attach panels [5], [6] and [10] to panel [3] with 7x dowels (A) and secure with 7x locking nuts (D). Tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 6 Attach panels [11] to panel [1], secure with 4x locking nuts (D). Attach panel [1] to panels [3], [4], [7] and [8], secure with Tighten with a screwdriver. 8x locking nuts (D). Tighten with the Allen Key (M). mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 7 Attach panels [12] together with connect sticks [21]. Slide panels [12] Insert 8x bolts (C) into panel [2]. Tighten with a screwdriver. down along the grooves between the panels [3] and [4]. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 8 Insert 4x bolts (C) into panels [13]. Attach panels [13] and [14] together with with 4x screws (B). Tighten with a screwdriver. 4x locking nuts (D). Tighten with a screwdriver. Attach 4x plastic glide (N) to panels [13] using a hammer. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 9 Insert 4x bolts (C) into panel [15]. Insert 12x bolts (C) into panels [16] Attach panels [13] and [14] to panel [2] with 8x locking nuts (D). and tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 10 Attach panels [17] and [18] to panels [15] and [16], secure Slide panels [19] down along the grooves between the panels [17] and [18]. with 16x locking nuts (D) as shown. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 11 Attach slide rails (I) and slide rails (H) to the underside of the side panels as shown. Attach panels [17], [18] and [20] as shown using 16x screws (L). Secure with 24x screws (E) and tighten with a screwdriver. Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 12 Ensure the drawers slide easily along the rails. with 8x screws (K). Now attach 1x safety strap (V) to the back edge of panels [12] using 1x washer (Z) and 1x screw (W). Tighten with a screwdriver. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...
  • Page 13 (V). Fasten to the wall using 1x washer (Z), 1x wall anchor (X) and 1x screw (Y). Ensure unit is balanced and steady before use. mocka.co.nz | mocka.com.au | PO BOX 6171, Maroochydore, QLD, 4558...