Tripp Lite NetCommander B072-016-IP4 Owner's Manual page 35

2. Web Configuration Interface
• To add an LDAP/S server to the list, click on the Add button to bring up the Add LDAP Server screen.
• Enter the IPv4, IPv6, or Host address for your LDAP/S server in the corresponding field.
• Select the Port number that is used by the server. The default port number is 389 for LDAP/TLS servers and 636 for LDAPS servers.
• Select from one of three encryption methods to use: No encryption, SSL, or TLS extension.
• Click the OK button to add the server to the list.
• Servers can be edited or deleted by highlighting them in the list and clicking on Edit or Delete. They can be re-ordered according to their
priority by highlighting them and clicking on Up or Down to move them in the list.
Search – The Search section is where you set the account DN that is used to query the LDAP/S server, and where in the directory to search
during authentication. Reference the following screenshots and descriptions of the Search fields when adding this information.
• Search DN – The Search DN field should be populated with the value of the Distinguished Name attribute for the user account that is
being used to query the Active Directory.
35