Watchguard AP322 Hardware Manual page 7

AP Firmware 8.8.0 and Lower
Device Indicators in AP Mode
Power
Solid green
Solid green
Solid amber
Solid amber
Solid amber
Off
Device Indicators in WIPS Mode
These indicators are active when the AP is set to dedicated WIPS (Wireless Intrusion Prevention System) mode.
For more information about WIPS mode, see the WatchGuard Wi-Fi Cloud help.
Power
Solid green
Solid green
Solid amber
Solid amber
Solid amber
Off
Solid green
Solid green
Solid green
Solid green
Hardware Guide
LAN1 LAN2
Solid green On/Off
Slow flash On/Off
green
Solid green On/Off
Fast flash On/Off
green
Slow flash On/Off
green
Off Off
LAN1 LAN2
Solid green On/Off
Slow flash On/Off
green
Solid green On/Off
Fast flash On/Off
green
Slow flash On/Off
green
Off Off
Solid green On/Off
Solid green On/Off
Solid green On/Off
Solid green On/Off
2.4 GHz 5 GHz Description
Any Any Powered on and operating
correctly. Connected to
WatchGuard Wi-Fi Cloud services.
Any Any Software upgrade in progress.
Any Any No Ethernet link.
Any Any Did not receive a valid IP address
from DHCP.
Cannot connect to WatchGuard 
Any Any
Wi-Fi Cloud services.
Off Off Not powered on or in startup
process.
2.4 GHz 5 GHz
Solid Solid
green green
Slow flash Any
green
Solid Any
green
Fast flash Any
green
Slow flash Any
green
Off Off
Solid Solid
Green green
Solid Fast flash
Green green
Solid Fast flash
Green green
Solid Solid
Green green
Hardware Specifications
Description
Powered on and operating
correctly. Connected to
WatchGuard Wi-Fi cloud
services.
Software upgrade in process.
No Ethernet link.
Did not receive a valid IP
address from DHCP.
C annot connect to
WatchGuard Wi-Fi Cloud
services.
Not powered on or in startup
process.
Sensor is troubleshooting on
802.11b/g/n
Sensor is troubleshooting on
802.11a/n/ac
Sensor is troubleshooting on
both 802.11b/g/n and 802.11a/
n/ac
Sensor is performing intrusion
prevention on 802.11b/g/n
5