Table of Contents
Advertisement
Turning the System On
With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
1
When the system is used for the first time, the
language selection menu is displayed. There are 24
languages to choose from. Touch [
scroll the list, and then touch the desired language.
• You can also scroll through lists by touching the screen and
sliding your finger up and down.
2
Touch [OK].
The radio screen is displayed.
• Some of this unit's functions cannot be performed while the vehicle is
in motion. Be sure to stop your vehicle in a safe location and apply
the parking brake before attempting these operations.
Initial System Start-Up
Be sure to press the RESET switch when using the unit for the first
time, after changing the car battery, etc.
Press RESET with a ballpoint pen or similar pointed
object.
RESET switch
Inserting/Ejecting a Disc
Inserting the Disc
Insert the disc with the label side facing up.
] or [
] to
When you insert the disc up to certain point, it is automatically
pulled into the unit. The unit starts to play the disc.
• Do not touch the surface of the disc directly with your fingers.
• Before inserting or removing the disc, always turn the ignition key to
ACC or ON. You cannot remove or insert the disc with the ignition
key turned to OFF.
Removing the Disc
Press
When the disc has been ejected part way, take it out.
If the disc cannot be ejected by pressing
again for at least 5 seconds.
Adjusting the Volume
Adjust the volume by pressing
Volume decreases/increases continuously by pressing and
holding
Volume: 0 - 35
Lowering Volume Quickly
Audio Mute function instantly lowers the volume level to 0.
1
Press MUTE button to activate the MUTE mode.
The audio level will be 0.
2
Pressing MUTE button again will bring the audio
back to its previous level.
(Eject button).
or
or
.
Disc Slot
, press and hold
.
15
-EN
Advertisement
Table of Contents
