Alpine INE-W960HDMI Owner's Manual page 90

5
Reinforce the head unit with the metal mounting
strap (not supplied). Secure the ground lead of the
unit to a clean metal spot using a screw (*1) already
attached to the vehicle's chassis. Connect all the
leads of the INE-W960/INE-NAV-60/INE-W960S
according to details described in the "Connections"
(page 92).
Hex Nut (M5)
Metal
Mounting
Strap
Ground Lead
• For the screw marked "*2," use an appropriate screw for the chosen
mounting location.
6
Slide the INE-W960/INE-NAV-60/INE-W960S into the
dashboard until it clicks. This ensures that the unit is
properly locked and will not accidentally come out
from the dashboard.
Removal
1. Insert the bracket keys into the unit, along the guides
on either side. The unit can now be removed from the
mounting sleeve.
2. Pull the unit out, keeping it unlocked as you do so.
90
-EN
Screw
2
*
Bolt Stud
1
*
This unit
Chassis
This unit
Bracket keys
(Included)
Installation example using the Original Mounting
Bracket
1
Mount the original mounting bracket to the unit
using the supplied screws.
Ground Lead*
Chassis
Original Mounting Bracket
2
Connect all other leads of the unit according to
details described in the "Connections" (page 92).
3
Mounting the unit in a car.
* To securely connect the ground lead, use an already installed screw
on a metal part of the vehicle (marked (
spot on the vehicle's chassis.
• Fix the cables carefully. Do not damage them by tucking them into
movable parts, such as a seat rail, or by locating them against sharp
or pointed edges.
Screws (M5 x 8)
(Included)
)) or a clean, bare metal