Getting Started; Location Of Controls; Turning Power On Or Off; Turning The System On - Alpine OWNER'S MANUAL Owner's Manual

Getting Started

Location of Controls

RESET switch
The system of this unit is reset.
/ (UP/DOWN) button
Press to adjust the volume.
(MUTE)/ (Favourite) button
Press to activate/deactivate the mute mode.
Press and hold for at least 2 seconds to recall the Favourite
screen.
button
Depending on the connected smartphone, press to recall Siri
function or voice recognition mode.
(MENU)/ (Power Off) button
Recalls the Menu screen.
Press and hold this button for at least 5 seconds to turn the
power off.
(NAV) button
Recalls the navigation map screen.
Press again to switch to Navigation menu screen.
Press and hold this button for at least 2 seconds to change to Go
Home route screen. (If Home is not set yet, it will change to the
Home setting screen.)
For details of navigation operations, refer to "Navigation System
OM" in the CD-ROM.
/ button
Press to seek up/down a station in radio mode or up/down a
track, chapter, etc., in other audio/visual sources.
About the button descriptions used in this Owner's
Manual
The buttons found on the face of the unit are expressed in bold
(e.g. (MENU)). The buttons found on the touch-screen display
are shown in bold within brackets, [ ] (e.g. [
14

Turning Power On or Off

Some of this unit's functions cannot be performed while the vehicle is in
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake, before attempting these operations.
1
2
• The unit can be turned on by pressing any button.
• The unit is a precision device. Careful handling of the unit should

Turning the System On

With the Alpine system, when the ignition key is turned to ACC or ON,
the opening screen will be automatically displayed.
When the system is used for the first time, the language
selection menu is displayed. Swipe the Language list screen
vertically, then touch your choice from the list of 23 languages.
• For your driving safety, please read the warning prompt displayed on
• Some of this unit's functions cannot be performed while the vehicle is in

Initial System Start-Up

Be sure to press the RESET switch when using the unit for the first time,
after changing the car battery, etc.
1
2
]).
Turn the ignition key to the ACC or ON position.
The system turns on.
• When turned on, the system displays the last screen that was
displayed before the ignition key was turned off. For example, if
the unit is in radio mode when ignition is turned off, it will remain
in radio mode when ignition is turned back on.
Press and hold the (MENU)/ (Power Off) button for
at least 5 seconds to turn the power off.
provide you with years of trouble-free operation.
this unit carefully.
motion. Be sure to stop your vehicle in a safe location and apply the
parking brake before attempting these operations.
Turn off the unit power.
Press the RESET switch with a ballpoint pen or similar
pointed object.
RESET switch