Replay Function; Parental Control Function; Using Jump Memory And Jump Recall Function - Alpine INE-W960HDMI Owner's Manual

Replay Function

In SiriusXM mode, you can pause, rewind and replay live Satellite
Radio.
Buffer usage
Current Replay point
Time to live
Replay range
Replay status indicator
1
Touch [ / ] to Pause playing of the channel
content.
The " (Pause)" icon and progress bar is displayed.
2
Touch [ / ] again or touch [
the screen to resume playing the content.
The " (Play)" icon lights up and offset playback
commences.
3
Touch [ ] to exit Instant Replay and listen to live
content.
• To fast reverse, touch and hold [ ] and to fast forward, touch and
hold [ ].
• Touching [ ] or [ ] will move a track up/down.
• If you change channels while in Replay mode, the contents of the
replay buffer are emptied.
• The allowed recording time differs depending on the SiriusXM Tuner
Box.

Parental Control Function

The Parental Control feature allows you to limit access to any SiriusXM
channels, including those with mature content. For information on
setting the Parental Control passcode, refer to "Setting the Parental
Lock" (page 45).
When a locked channel is selected, "Channel Locked" is displayed and
then the numeric keypad appears for you to enter the passcode.
Input the 4-digit passcode you set in "Setting the
Parental Lock" on page 45.
The initial number is 0000.
• If you input a wrong passcode, "Incorrect passcode" is displayed.
• After entering the correct passcode, you can access all locked
Using Jump Memory and Jump Recall
Function
The Jump Channel is a special channel that you can jump to with the
press of a dedicated button and then jump back to the previous channel.
This channel is often used to select your favorite SiriusXM traffic and
weather report channel.
] in the middle of
1
2
• Only one channel can be stored as the jump source channel. When
channels without entering the passcode again until the unit is
powered off and then back on.
To store the currently received channel as the Jump
channel in memory, touch and hold [JUMP] for at
least 2 seconds.
Touch [JUMP] to recall and tune to the saved Jump
channel.
you want to store a new channel, the old channel will be cleared and
the new one will be memorized.
77
-EN