Using the Oscilloscope
238
Measurements Using the Main Control Fields:
•
Vert/div selects the vertical amplitude per division.
Units for this field are in Volts, kHz, or percent depending on the AF Anl
In selection.
•
Vert Offset moves the displayed signal above or below the center graticule
line.
•
Time/div selects the horizontal sweep time per division.
Indicators:
•
Input source is displayed in the lower left corner of the display.
•
Marker Time ms changes the units that the marker position is displayed
in. Displayed value is the time elapsed from the trigger point to the cur-
rent position.
•
Marker Lvl V/kHz/% changes the units that the marker position is dis-
played in. Displayed value is the signal level at the current position.