Tool specifications
Model number
Stock number
Pad size
Head angle
Horsepower
Spindle thread
Free speed
Average air consumption
Air inlet
Air hose inside diameter
Required air pressure
Vibration value
1
Noise level
Power setting
Grip
Overall Length
Housing material
Net weight
Shipping weight
1
The specified values are emission levels and are not necessarily to be seen as safe operating levels. As
workplace conditions vary, this information is intended to allow the user to make a better estimation of the
hazards and risks involved only.
Specifications were current at time of publication, but because of our policy of continuous improvement, JET
reserves the right to change specifications at any time and without prior notice, without incurring obligations.
6
JAT-740 Angle Sander
JAT-740
505740
7 in. round
90 deg.
0.75
5/8"-11 UNC
4500 RPM
4.2 CFM
1/4 in. NPT
3/8 in.
90 psi (621 kPa)
2
<2.5 m/s
90 dB(A)
Variable speed
Inline
12 in. (304.8 mm)
Aluminum with rubber grip
4.72 lb. (2.14 kg)
5.39 lb. (2.44 kg)