HP 8921A Programmer's Manual page 509

Reading the CALL BIT Screen Message Fields
Table 50 CALL BIT Screen Signaling Message Names
This section provides programming information on how to read the contents of
individual fields in the signaling messages available on the
The syntactical structure for reading the contents of one or more fields from an
individual message is as follows:
General Syntax
CALLP:<message name>:<field name><?>[<;><additional field><?>]
lists the message names used to access each of the signaling
Table 50 on page 509
messages available on the
Message
SPC WORD1 SPOM1/SPOMESSAGE1
SPC WORD2 SPOM2/SPOMESSAGE2
ACCESS ACCess
REG INC RINCrement
REG ID RIDentify
C-FILMESS CFMessage
MS WORD1 MSWord
MSMessOrd MSORder
MS IntvcH MSVoice
FVC O Mes FVORder
FVC C Mes FVVoice
Example of Querying A Single Field
OUTPUT 714;"CALLP:MESS 'SPC WORD1'"
OUTPUT 714;"CALLP:SPOM1:SID?"
ENTER 714;Sid$
PRINT Sid$
Example Printout
"00000001110011"
Chapter 8, Programming The Call Processing Subsystem
screen.
CALL BIT
Message Name
Programming The CALL BIT Screen
screen.
CALL BIT
509