HP 8921A Programmer's Manual page 485

TX Freq Error
TX Power
This field displays the frequency error (frequency error = assigned carrier
frequency - measured carrier frequency) of the RF carrier being transmitted by the
mobile station. Four dashes (----) indicate that no RF carrier is present to measure.
A numeric value would only be displayed in the connected state (that is, the
annunciator is lit). The
Connect
the field is set to
Display
Refer to the
Display field description, on page 465
read data in the upper right hand portion of the
This field displays the measured RF power of the RF carrier being transmitted by
the mobile station.
A nonzero value would only be displayed in the connected state (that is, the
annunciator is lit). The
Connect
field is set to
Display
Refer to the
Display field description, on page 465
data in the upper right hand portion of the
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL CONTROL Screen
TX Freq Error
.
Meas
field is only displayed when the
TX Power
.
Meas
CALL CONTROL
field is only displayed when
, for information on how to
screen.
CALL CONTROL
, for information on how to read
screen.
485