HP 8921A Programmer's Manual page 478

Chapter 8, Programming The Call Processing Subsystem
Programming The CALL CONTROL Screen
Phone Num:
CAUTION:
NOTE:
478
This field displays the phone number decoded from the MIN number received
from the mobile station on the reverse control channel in response to a forward
control channel message
The field is only displayed when the
Phone Num:
and a reverse control channel message containing this information has been
decoded.
Refer to the
Display field description, on page 465
read data in the upper right hand portion of the
Do not confuse the Phone Num: field, which is displayed in the upper right-hand portion
of the CALL CONTROL screen, with the Phone Num selection of the MS Id field.
An all zero MIN number (000000000), which does not represent a valid phone number, will
convert to the following phone number: 111111?111.
field is set to
Display
, for information on how to
screen.
CALL CONTROL
Data