HP 8921A Programmer's Manual page 477

Page
[] Page
This field is used to initiate a page to the mobile station connected to the Test Set.
The Test Set must be in the active state (that is,
information must be correct before attempting to page a mobile station.
MS Id
The :PAGE command is used to control this field.
There is no query form of the :PAGE command.
Syntax
:PAGE
Example
OUTPUT 714;"CALLP:PAGE"
When lit, the annunciator indicates that the mobile station connected to the
Page
Test Set is currently being paged on the forward control channel.
The annunciator is not programmable.
Page
The state of the
Page
Register Group Condition Register bit 3.
Group," in chapter 5, on page 274
Chapter 8, Programming The Call Processing Subsystem
Programming The CALL CONTROL Screen
annunciator is reflected in the Call Processing Status
See "Call Processing Status Register
for further information.
annunciator lit) and the
Active
477