Your Model - Pitney Bowes Horizontal Belt Stacker Operator's Manual

1 • Product Overview
The Relay™ 5000/6000/7000/8000 Inserters output small ('letter')
envelopes at a different height to large ('flat') envelopes. Tandem belt
stacker configurations are available to allow automatic stacking of both
envelope sizes simultaneously.

Your Model

The belt stacker is tailored to work with the particular machine outputting
to it, and the configuration used, by the addition of kits. Your stacker will
be supplied with only the correct kit(s) for your particular installation.
This guide explains setup and operator adjustments for each machine
combination, but assumes that the stacker has been previously installed
by a service representative and that all necessary kits of adapters and
parts are available.
In most cases, it is NOT possible to change the belt stacker configuration
or link the stacker to a different Inserter without some modifications being
necessary. If you wish to do this, contact your machine supplier.
1-4 SV40231 Rev. C