Juicebox Modes; Connect & Charge Mode; Unlock To Charge Mode - Enel X JUICEBOX PRO User Manual

2. JuiceBox modes

Before setting up your JuiceBox, it's important to determine which mode your JuiceBox will
use. JuiceBox has 2 modes: Connect&Charge mode and Unlock to Charge mode.
2.1 Connect & Charge mode
NOTE
This mode is suggested when the JuiceBox is installed in areas with access that is
exclusive to the user.
v
This mode does not require any authentication before starting and ending a charging
session. However, this mode does not permit setting up delayed charging.
>
To start charging, simply plug in your vehicle.
>
To stop charging, send a stop command (from the JuicePass app or from the vehicle)
and then unplug your vehicle.
JuiceBox uses the Connect & Charge mode by default. However, it is still recommended to
follow the steps in the "Getting Online" section in order to configure your JuiceBox settings,
remotely manage charging sessions, and more.

2.2 Unlock to Charge mode

NOTE
This mode is suggested when the charger is installed in areas with public access.
v
In Unlock To Charge mode, the JuiceBox only charges when it recognizes an authorized
user. This means that charging sessions are started and stopped using either an authorized
JuicePass App account or a RFID card associated with the JuiceBox. This mode also allows
setting up delayed charging.
4