Built-In Installation - Smeg CMSCU451S Instructions Manual

light up the spout and cup tray.
The lights stay on until the appliance is turned off.
While coffee, steam or hot water is being delivered, the cooling
fan comes on.
At the end of the function, the cooling fan remains on to avoid
condensation forming inside the cabinet. After several minutes,
the fan goes off automatically.
N.B.: The appliance also completes this cycle if switched
off by turning the knob (C6) to the right or left.
Important! Do not look at the lights directly or using
an optical instrument.

BUILT-IN INSTALLATION

Verify the minimum measurements required for correct instal-
lation of the appliance.
The coffee maker must be installed in a column and the column
must be firmly fixed to the wall with commercially available
brackets.
Important:
• Important: all installation or maintenance operations must
be performed with the appliance disconnected from the
mains electricity supply.
• Kitchen furniture in direct contact with the appliance must
be heat resistant (65°C / 149 F° min).
• To guarantee correct ventilation, leave a gap at the bottom
of the cabinet (see measurements in figure).
45 m m
45 m m
1. 77 i n
1. 77 i n
45 m m
45 m m
1. 77 i n
1. 77 i n
45 m m
45 m m
1. 77 i n
1. 77 i n
45 m m
45 m m
1. 77 i n
45 m m
1. 77 i n
1. 77 i n
45 m m
1. 77 i n
45 m m
1. 77 i n
45 m m
10
1. 77 i n