Description Of Milk Container And Accessories; Description Of Control Panel; Preliminary Checks; Controls After Transport - Smeg CMSCU451S Instructions Manual

A5. Infuser
A6. Lights
A7. Control panel
A8. Hot water and steam nozzle
A9. Water tank
A10. Coffee spout (adjustable height)
A11. Drip tray
A12. Bean container lid
A13. Container for coffee beans
A14. Grinding adjustment knob
A15. Pre-ground coffee funnel door
A16. Compartment for measure
A17. Pre-ground coffee funnel
A18. Power cable
A19. Main switch
A20. Tray
A21. IEC connector

Description of milk container and accessories

(page 3 - B)
B1. Frothed milk regulator
B2. Milk container handle
B3. CLEAN button
B4. Milk intake tube
B5. Frothed milk spout
B6. Milk frother
B7. Hot water spout
B8. Measure

Description of control panel

(page 3 - C)
A number of buttons on the panel have a double function. This is
indicated in brackets in the description.
C1. Display: guides the user in using the appliance.
C2. MENU button to activate or deactivate menu parameter
setting mode
C3. button to select pre-ground coffee
(When in the MENU: NEXT button to display the next menu
parameter).
C4. Rinse button to perform a brief rinse to heat the infus-
er.
(When you access the MENU: "CHANGE" button to modify
menu parameters).
C5. button to deliver hot water.
(When you access the MENU: OK button to confirm menu
parameters).
C6. knob to turn the appliance on and off.
C7. button to select the coffee taste
C8. button to deliver one or two cups of short coffee
C9. button to deliver one or two cups of standard coffee
C10. button to deliver one or two cups of long coffee
C11. knob to deliver cappuccino or frothed milk

PRELIMINARY CHECKS

Controls after transport

After removing the packaging, make sure the product is com-
plete and undamaged and that all accessories are present.
Do not use the appliance if it is visibly damaged.
Contact Customer Services.

Installing the appliance

Important! When installing the appliance, respect the
following safety warnings:
• Installation must be performed by a qualified professional
in compliance with legislation in force in the country of
installation (see section: BUILT-IN INSTALLATION).
• The packing elements (plastic bags, polystyrene foam,
etc.) should be kept out of reach of children as they are a
safety hazard.
• Do not install the appliance in rooms where the temper-
ature may drop to 0°C / 32°F or lower (the water in the
appliance could freeze and cause damage).
• You should customise the water hardness as soon as pos-
sible following the instructions in the "SETTING WATER
HARDNESS" section.

Connecting the appliance

Danger! Check that the mains power supply voltage
corresponds to the value indicated on the appliance rating plate.
Connect the appliance to an efficiently earthed and correctly
installed socket with a minimum current rating of 10A only.
If the power socket does not match the plug on the appliance,
have the socket replaced with a suitable type by a qualified pro-
fessional.
To comply with safety directives, an omnipolar switch with a
minimum contact distance of 3 mm / 0.12 in must be installed.
Do not use multiple sockets or extensions.
To learn to use the appliance correctly, the first time you use it
follow the detailed instructions in the following sections.
Important! Safety cutout devices must be included
in the mains power supply in compliance with the installation
regulations in the country concerned.

AUTOMATIC CUP TRAY LIGHT

When the appliance is turned on, the lights (A6) automatically
9