Table of Contents
Advertisement
16
Right-click the new drive and select Initialize Disk.
17
Right-click the initialized hard drive and select Convert to Dynamic Disk. A RAID array cannot be built unless the
hard drive is converted to a dynamic disk.
18
Select the step depending on your reason for a created volume.
To create a new volume (except for a RAID 5 or mirrored volume):
(1) Right-click the new dynamic disk and select New Volume.
(2) Follow the instructions on the screen to create a new volume.
To restore a RAID 5 volume (RAID resynchronization):
(1) Right-click the volume labeled "Failed Redundancy" and click Restore Volume.
(2) When "Select one of the disks listed below." is displayed, select the drive to restore and click OK.
Perform steps (1) and (2) for each volume that requires RAID resynchronization.
(3) Right-click the volume labeled "Missing" and select Remove Disk.
34
Advertisement
Table of Contents
