Table of Contents
Advertisement
7
If your TeraStation has a front cover, open it with the included key.
8
Push the unlock button of the failed hard drive and swing the lock mechanism out.
9
Pull out the hard drive cartridge and remove it from the TeraStation.
10
Insert the new hard drive (sold separately) into the empty slot. Slide the drive in with the locking mechanism
open.
11
Swing the lock back down until it clicks into place.
12
Close the front cover with the included key. If the hard drive was replaced while the TeraStation was off, power
it on now.
13
Buffalo Dashboard will show the drive status "Getting...".
14
After the drive status changes to "Normal", open Administrative Tools and double-click Computer Management
in Windows Storage Server.
15
Click Disk Management.
33
Advertisement
Table of Contents
