Malmbergs 99 190 22 Installation And Instruction Manual

FLUSH MOUNT MICROWAVE DALI SENSOR 99 190 22
1. Technical Specifications
Product type Independent microwave DALI sensor (Daylight harvest)
Operating voltage 220~240VAC 50/60Hz
Switched power Maximum 20pcs devices Maximum 40mA
Power consumption < 0.5W
o
Detection angle 360
Detection area (DxH) 12 x 6m (Maximum)
Detection range 10% / 50% / 75% / 100%
Hold time 2s / 30s / 1min / 5min / 10min / 15min / 20min / 30min
Stand-by time 0s / 10s / 1min / 5min / 10min / 30min / 1h / +
Stand-by dimming level 10% / 20% / 30% / 50%
Daylight threshold 50 ~ 500Lux , Disable
Warmming-up time 20s
o
Operating temperature -20 C ~ +60

3. Rotary Switch Settings

A rotary switch is built inside the sensor for
scene selection / fast programming. Total
16 channels available:
Detection Hold
Channel
range time
0 100% 5s
1 100% 1min
2 100% 5min
3 100% 5min
4 100% 5min
5 100% 5min
6 100% 10min
7 100% 10min
8 100% 10min
9 100% 10min
A 100% 20min
B 100% 20min
C 100% 30min
D 100% 30min
E 100% 30min
F 100% 5s
Note: settings can also be changed by remote control 99 190 27. The last action controls.

4. Functions

4.1 Daylight Harvest (Daylight Regulating)

Daylight sensor measures the available surrounding natural light, calculates how much electrical light is
needed to reach the total lux expected. The demand is given to the LED driver by DALI signal, so as to
deliver the needed amount of electric light.
Light level
Energy Saving Zone
0

4.2 Lux Off Function

The built-in daylight sensor can read ambient natural light and switch off the fixture automatically whenever
artificial light is not required (natural light lux level exceeds daylight threshold).
Note: if the stand-by time is preset at "+∞", the fixture never switches off even when natural light is
sufficient.
www.malmbergs.com
Art.no: 99 190 22
Installation and Instruction Manual
o
C
Rotary switch preset (Please
see the location in 2. Installation)
Stand-by Stand-by
time dimming level
10s 10%
5min 10%
10min 10%
+∞ 10%
+∞ 10%
+∞ 30%
30min 10%
+∞ 10%
+∞ 10%
+∞ 30%
1h 10%
+∞ 30%
+∞ 10%
+∞ 30%
+∞ 50%
10s 10%
Hold time
Normal Electric Light
Daylight controlled light
Stand-by time
Natural light
4 2
Time (hrs)

2. Installation

Warnings:
1. Installation of the sensor involves connecting it to the mains supply. This work must be
carried out by a specialist in accordance with electrotechnical regulations.
2. Disconnect supply before installing.
Infrared receiver
Rotary switch preset
Daylight
Lens
threshold
Disable
Varning!
50Lux Stäng av strömmen, ta ut säkringen på elcentralen eller ställ automatsäkringen till läge "AV", innan
installationsarbetet påbörjas.
50Lux
Skall installeras av behörig installatör och i enlighet med gällande föreskrifter.
75Lux
100Lux

4.3 Semi-auto Function (Absence Detection)

200Lux
The motion sensor is employed, but only activated on the manual press of the push switch,
50Lux
light keeps on in the presence, and dims down in the absence, and eventually switches off
75Lux
automatically in the long absence.
100Lux
200Lux
100Lux

4.4 Ambient Daylight Threshold

200Lux
Switch the power supply to the sensor two times within 2 seconds, the ambient lux level is
sampled and set as the new daylight threshold. Both the settings on rotary switch and the
100Lux
ambient lux level sampled can overwrite each other. This feature enables the daylight sensor
200Lux
to be commissioned to the environment in which it is installed. The last adjustment remains in
400Lux
memory.
100Lux

4.5 8H Manual ON Mode For LED Lamp

Turn off/on the power supply three times within 3 seconds, the light will be turned on for 8
hours, even there is no motion detected, then go back to sensor mode automatically.
Note: this 8H manual on mode can be cancelled by turning off/on the power supply one time
within 1 second.

4.6 Manual Override

With the help of push-switch, this sensor maybe over-ridden by the end-users to switch on/off
the lights manually, or adjust the light brightness during motion hold-time. This makes the
product more user-friendly and offers more options to fit for extra-ordinary demands.
* Short push (<1s): on/off function;
ON → OFF: the light turns off immediately and cannot be lighten for a certain time (equals
to hold time preset) even there is movement is detected. After this period, the sensor goes
back to auto sensor mode.
OFF → ON: the light turns on 100% and goes to auto sensor mode, even when ambient
Lux level exceeds the daylight threshold.
* Long push (>1s): adjust the target lux level by turning the light up or down. Both the
* If no end-user adjustment is desired, simply leave this terminal disconnected.

4.7 Synchronization Function

By connecting the "SYNC" terminals in parallel (see wiring diagram), no matter which sensor
detects motion, all 99 190 22 in the group will turn on the lights when surrounding natural light
is below the daylight threshold. The sensor module is shared and the detection area could be
widely enlarged in this way.
70mm
4
3
Photocell
1
LED indicator
(1) Sensor inset
(2) Lens pluggable
(3) Protection cover (covers the
high-voltage terminals, and leaves
the DALI terminals exposed).
(4) Ceiling (drill hole O 70mm).
2
adjustment on remote control and push switch can overwrite each other,
the last adjustment remains in memory.
64.7
2017.03.01