Malmbergs io-PIR-BLE Instruction Manual

EN
INSTRUCTION MANUAL
PIR Sensor Bluetooth
Art.No.: 99 190 58
Model No.: io-PIR-BLE
Malmbergs Elektriska AB
PO Box 144, SE-692 23 Kumla, SWEDEN
www.malmbergs.com
Malmbergs Elektriska aB (publ)
PO Box 144, SE-692 23
Kumla, SWEDEN
Phone: +46 (0)19 58 77 00
info@malmbergs.com
www.malmbergs.com

TEchNical SpEcificaTioNS

Product type PIR sensor Bluetooth
Wireless
Bluetooth
connection
Operating temp. Ta: -20ºC - +45ºC
Detection 5-7 m
IP-rating IP20
Dims (WxDxH) 48x48x27 mm
CR2450 3V DC
Battery type
(Included)
Detection angle 120º
EMC Standard (RED)
ETSI EN 301 489-1 V2.2.3(2019-11),
ETSI EN 301 489-17 V3.1.1(2017-02),
EN 55032:2015, EN 55035:2017
Safety Standard (RED)
EN 62368-1:2014+A11:2017, EN 60598-
2-12:2013, EN 60598-1:2015 +A1:2018,
EN 62471: 2008, EN 62493:2015,
EN 62031: 2008+A1:2013+A2:2015,
EN 61347-1:2015, EN 61347-2-
13:2014+A1:2017
RoHS Standard (RoHS)
(EU)2015/863, 2011/65/EU
Radio Equipment (RED)
EN 300 328 V2.2.2
Health Standard (RED)
EN 50663:2017
REACH Standard (RED)
(EC) No 1907/2006
2

iNSTallaTioN

Warnings:
• This device does not support standalone
application and it must work together
with the Bluetooth gateway (Example
99 190 42 optional accessories) under the
same WIFI network configuration.
• Indoor use only.
• Keep the device out of reach of children.
• Keep the device away from water, damp
or hot environment.
• Do NOT exceed the recommended
electrical ratings.
• Install the device away from strong signal
sources such as microwave ovens, which
may lead to signal interruption resulting
in abnormal operation of the device.
• Obstruction by concrete wall or metallic
materials may reduce the range of the
device and should be avoided.
• Do NOT attempt to disassemble, repair or
modify the device.
product size
Ø 48 mm
4
control your Smart home wherever you are
Device Sharing
Anywhere
APP
99 190 57 99 190 58 99 190 59
Door sensor PIR Sensor
T&H sensor
APP
99 190 57 99 190 58 99 190 59
Door sensor PIR Sensor
T&H sensor
APP
Gateway 99 190 42
Apps Router
3

Wiring instructions and Diagrams

The device must only be installed indoors.
The correct installation should meet the
following conditions:
1. Ensure that the device is within the
range of the Bluetooth gateway
network.
2. The device detects unexpected move-
ment and works in conjunction with
other devices to implement smart home
application.
3. The device should be mounted 1.6-
1.8m above ground level without
blocking by furniture or partition with
the detection range.
4. Installation environment of the device
should be free from strong airflow or
waterflow and intensive movement
which may resulted to unnecessary
false alarm.
Bluetooth Gateway
99 190 42
(Example)
PIR Sensor
5
Gateway
99 190 42
(Example)
(Example)