Malmbergs io-DS-BLE Instruction Manual

EN
INSTRUCTION MANUAL
Door and Window
Sensor Bluetooth
Art.No.: 99 190 57
Model No.: io-DS-BLE
Malmbergs Elektriska AB
PO Box 144, SE-692 23 Kumla, SWEDEN
www.malmbergs.com
Malmbergs Elektriska aB (publ)
PO Box 144, SE-692 23
Kumla, SWEDEN
Phone: +46 (0)19 58 77 00
info@malmbergs.com
www.malmbergs.com
TEchNical SpEcificaTioNS
Door and window
Product type
sensor Bluetooth
Wireless
Bluetooth
connection
Operating temp. Ta: -20ºC - +45ºC
Case temp. Tc: +50ºC (Max.)
60x27x10 mm
Dims (WxDxH)
35x10x10 mm
CR2032 3V DC
Battery type
(Included)
EMC Standard (RED)
ETSI EN 301 489-1 V2.2.3(2019-11),
ETSI EN 301 489-17 V3.1.1(2017-02),
EN 55032:2015, EN 55035:2017
Safety Standard (RED)
EN 62368-1:2014+A11:2017, EN 60598-
2-12:2013, EN 60598-1:2015 +A1:2018,
EN 62471: 2008, EN 62493:2015,
EN 62031: 2008+A1:2013+A2:2015,
EN 61347-1:2015, EN 61347-2-
13:2014+A1:2017
RoHS Standard (RoHS)
(EU)2015/863, 2011/65/EU
Radio Equipment (RED)
EN 300 328 V2.2.2
Health Standard (RED)
EN 50663:2017
REACH Standard (RED)
(EC) No 1907/2006
2
iNSTallaTioN
Warnings:
• This device does not support standalone
application and it must work together
with the Bluetooth gateway (Example
99 190 42 optional accessories) under
the same WIFI network configuration.
• Indoor use only.
• Keep the device out of reach of children.
• Keep the device away from water, damp
or hot environment.
• Do NOT exceed the recommended
electrical ratings.
• Install the device away from strong signal
sources such as microwave ovens, which
may lead to signal interruption resulting
in abnormal operation of the device.
• Obstruction by concrete wall or metallic
materials may reduce the range of the
device and should be avoided.
• Do NOT attempt to disassemble, repair
or modify the device.
product size
27 mm 10 mm
4
control your Smart home wherever you are
Device Sharing
Anywhere
APP
99 190 57 99 190 58
99 190 59
Door sensor PIR Sensor
T&H sensor
99 190 42
APP
(Example)
99 190 57 99 190 58
99 190 59
Door sensor PIR Sensor
T&H sensor
APP
Gateway 99 190 42
Apps Router
3
Wiring instructions and Diagrams
The device can only be installed indoors.
The correct installation should meet the
following conditions:
1. Ensure that the device is within the
range of the Bluetooth gateway
network.
2. The device detects the opening or clos-
ing of the door and window, and works
in conjunction with other devices to
implement smart home application.
3. Ensure that the door magnet is located
on the side of the alignment mark.
Bluetooth Gateway
99 190 42
(Example)
Door/Window
5
Gateway
(Example)
Sensor