Set Up Menu; Checking Set Up Contents - Sharp EL-9650 Operation Manual

CHAPTER 1

10. SET UP Menu

• SET UP is a function that sets input and display methods.
• Please select each method according to use.
• Be sure to set the SET UP mode according to desired calculations and graph
plotting since there may be differences in the results depending on the set conditions
of SET UP.
Ï

(1) Checking SET UP contents

Press .
Contents displayed on the right side of the screen when
selecting [A] are the current settings.
A
* "A" is highlighted and current settings are displayed when
entering the SET UP mode. In this case, it is not necessary to
press .
(2) SET UP menu
The above display will appear when
menu is used for displaying the current settings, the menus that can be set are B
through G, with sub-menus for each. The functions of these are explained below.
[B DRG]: Used to set the angle unit (default setting: Rad)
[1 Deg]: Set to degree
[2 Rad]: Set to radian
[3 Grad]: Set to gradient
Ï
}
The relationships are:
20
are pressed. Since item A of the main