Installing Pci To Isa Bridge Driver - Aaeon GENE-5315-A13 Manual

SubCompact Board GENE -5315
4.5 Installing PCI to ISA Bridge Driver (For Rev.A only)
Win XP / Win XPe System
Place the Driver CD-ROM into your CD-ROM drive and follow the
following steps to install.
1. Click on Start button.
2. Click on Settings button.
3. Click on Control Panel button.
4. Click on System button.
5. Select Hardware and click on Device Manager....
6. Double click on Other PCI Bridge Device
7. Click on Update Driver....
8. Click on Next.
9. Select Search for a suitable driver..., then click on Next.
10. Select Specify a location, then click on Next.
11. Click on Browse.
12. Select "Ite" file from CD-ROM (Drivers/Step 3- PCI to ISA
Bridge for RevA ) then click on open.
13. Click on OK.
14. Click on Next.
15. Click on Finish.
4 - 6
Chapter 4 Driver Installation