Channel Selection - Icom iDAS IC-iF3102D Instruction Manual

3
BASIC OPERATION

■ Channel selection

Several types of channel selections are available. Methods may dif-
fer, depending on the presetting.
To select a desired operating channel, do one of the following.
• Rotate [ROTARY SELECTOR].
• Push one of memory channel keys, [MR-CH 1] to [MR-CH 4].
• Push one of these keys, [Prio A], [Prio B], [Prio A (Rewrite)] and
[Prio B (Rewrite)].
AUTOMATIC SCAN TYPE:
Selecting a channel is not necessary for this type. When turning ON
the power, the transceiver automatically starts scanning. Scanning
stops when a signal is detected.
NOTE: If the Move to Priority A channel at Power ON function
(p. 24) is turned ON, the transceiver does not start scanning at
power ON.
D Voting Operation
The transceiver automatically starts scanning when a zone, speci-
fied for the voting operation, is selected.
The voting scan detects the signal of the repeater and automati-
cally selects the strongest station.
15