HANDLEBAR PAD
Install the handlebar pad to the handlebar reinforcing
bar.
A: Handlebar pad
B: Strap L:140 mm
FRONT
FUEL TANK VENT HOSE
Insert the free end of fuel tank vent hose to the hole of
starter cable bracket.
A: Fuel tank vent hose
B: Hole (Starter cable bracket)
FOOTREST
Remove the shipping pin from the footrest.
A: Footrest
B: Shipping pin
REFLEX REFLECTOR (FOR LIMITED MARKET)
Install the rubber grommet and collared spacer to the
bracket.
Set the reflex reflector using the flange nut.
A: Bracket
B: Rubber grommet OD:18.0 mm ID:8.5 mm T:6.0 mm
C: Collared spacer OD:17.0 mm ID:6.5 mm T:7.5 mm
D: Reflex reflector
E: 5 mm flange nut
13
Be sure not to bend or twist the hose when
installing.
Confirm that the right and left footrests move
smoothly.