M2 AAD User Manual page 23

6. Control
6.5.2 Sequence for displaying information in the device memory
Upon activating the m
2
control unit body (1). The
will appear sequentially (as per chapter 6.5.1).
digits saved in the m memory under the selected icon to be displayed.
2
Example:
Qucikly press the control button (2) on the control unit body (1). The
control button and the icons will appear in short sequences in the specified order
button and the following icons will gradually appear,
battery capacity is 99%) and then the icon indicating the device is activated will reappear
in the menu can be changed. Adjustment of the landing location altitude is performed during when the device is switched on.
as per chapter 6.1, the display will show icon
icon will be displayed and then the
or or . Quickly press the control button (2) on the
icon, immediately press the control button, and the icon below
. Clicking on one of the icons will cause the
will be displayed and then
( according to chapter 6.5.i, this means that the remaining
. All values are only displayed. No value
icon; immediately press the
; immediately press the control
23