Table of Contents
Advertisement
6. Control
6.4.2
Sequence for displaying information in the device memory
Upon activating the m
2
control unit body (1). The
appear sequentially (as per chapter 6.4.1).
saved in the m
memory under the selected icon to be displayed.
2
Example:
Quickly press the control button (2) on the control unit body (1). The
press the control button and the icons will appear in short sequences in the specified order
the control button and the following icons will appear,
battery capacity is 99%) and then the icon indicating that the device is activated will reappear
value in the menu can be changed. Adjustment of the landing location altitude is performed when the device is switched on.
as per chapter 6.1, the display will show icon
icon will be displayed, then the
or
on
. Quickly press the control button (2) on the
icon, immediately press the control button, and the icons below will
. Clicking on one of the icons will cause the digits
icon will be displayed and then the
(according to chapter 6.4.1, this means that the remaining
icon; immediately
; immediately press
. All values are only displayed. No
21
Advertisement
Table of Contents
