Control; Switching The Device On - M2 AAD User Manual

6. Control

6.1 Switching the unit "on"
Quickly press the control button (2) on the control unit body (1). Upon the
played (3) immediately press the control button a second time; the
immediately press the button a third time; when the
the button for the fourth time. The flashing
to-test and pressure calibration are in progress. Upon completion, the
on the display (3).The device is now on and preset to zero altitude – GROUND ZERO. If you fail
to switch off the device, it will automatically switch off after 14 hours.
The button only requires a short press - click. Pressing must occur when the
on the display. If this switching frequency has not been properly completed, the device will
return to the OFF mode. The sequence must be repeated in order to start the device.
icon will be displayed;
icon is displayed, immediately press
icon will be displayed, which indicates the au-
icon will be shown
icon being dis-
1
3
icon appears
2
17