Information In The Device Memory Calibrated In Meters (M) - M2 AAD User Manual

6. Control
6.4

Information in the device memory calibrated in meters (m)

6.4.1 Display description
The m retains information which is available to the user upon following the steps below. The following information can be found in the
2
memory.
m
2
Opening altitude of the last dive (4 digits = 0000 to 9999m);
Total number of dives during the device's operation (5 digits = 0-30000 dives);
Landing altitude adjustment (3 digits = 000 to 999m);
Remaining battery capacity in % (2 digits = 0 to 99%);
Device serial number (6 digits = XXXXXX);
Device configuration and firmware version (6 digits = VUFFFF);
V = version
„1" - expert
„2" - student
„3" - tandem
Year and month of manufacture (6 digits = YYYYMM; Y = year, M = month);
"Gravity index" of the last dive (3 digits = 0–99.9%);
The "gravity index" is the maximum speed of the last dive expressed in percentage, while 100% = the speed limit when
the cutter will be activated under BAgz (minimum set altitude above ground zero).
Pressure in 0.1 hPa (5 digits = XXXXX)
U = A/F
„A" – device calibrated in meters
„F" – device calibrated in feet
FFFF = firmware version
20