Remove Monitor Stand For Mounting - NEC MultiSync LCD1535VI User Manual

Tilt
Grasp both sides of the monitor screen with your hands and adjust the
tilt as desired (Figure F.1).
The movable scope for elevation and depression of LCD is -5°~30°
angle.(Figure F.2).

Remove Monitor Stand for Mounting

To prepare the monitor for alternate mounting purposes:
1. Disconnect all cables.
2. Place monitor face down on a non-abrasive surface (Place the
screen on a 36 mm platform so that the stand is parallel with the
surface.) (Figure G.1).
3. To take off back cover, please follow the instructions of arrow while
pressing two side of monitor.(Figure G.2)
Next, lift up the stand, dismantle upper cover, then go on to
dismantle the stand cover. (Figure G.3)
Return the stand to its original position, remove the 4 screws that
connect the monitor to the stand, and lift off the stand assembly.
(Figure G.4)
4. Reverse this process to reattach stand.
NOTE: Use only VESA-compatible alternative mounting method.
Figure F.1
English-9
Figure F. 2