Flexible Arm Installation; Remove The Monitor Stand For Mounting; Mount The Flexible Arm - NEC MultiSync EA242F User Manual

Flexible Arm Installation

This monitor is designed for use with a flexible arm. Contact NEC for more information.
Follow the instructions provided by the manufacturer of the display mount. Remove the monitor stand before mounting.


WARNING:
Please refer to

Remove the Monitor Stand for Mounting

NOTE: Handle with care when removing the monitor stand.
1

Mount the Flexible Arm

Using four screws that meet the specifications listed below, attach the arm to the monitor.
Spring washer
Flat washer


WARNING: Please refer to
"WARNINN 8". See the Specifications on
2
Non-abrasive surface
12 mm
M4
4 x 12 mm with lock
washer and flat washer
100 mm
"WARNINN 8".
page 35
3
Mounting
Bracket
(2.0 - 3.2 mm)
100 mm
English−20
for details.
Screw (M4)
Lock washer
and flat washer
Unit
Thickness of
bracket and
washer
6 - 10 mm