Toshiba teli BU040M Instruction Manual page 93

Please refer to [INode functions], [IEnumeration node functions][ICommand node functions][IInteger
node functions] in [TeliCamAPI Library manual] for more detail.
Register access API
Control Trigger features by accessing IIDC2 registers directly.
1. Select a trigger mode.
Write to 'Value' field of 'TriggerMode' register to control TriggerMode.
2. Select a trigger sequence of random trigger shutter.
Write to 'Value' field of 'TriggerSequence' register to control TriggerSequence.
3. Select a trigger source of random trigger shutter.
Write to 'Value' field of 'TriggerSource' register to control TriggerSource.
4. Select a trigger activation of hardware trigger.
5. Set the number of frames to exposure in Bulk mode.
Write to 'Value' field of 'TriggerAdditionalParameter' register to control TriggerAdditionalParameter.
6. Set a trigger delay.
Write to 'Value' field of 'TriggerDelay' register to control TriggerDelay.
7. Open and Start image stream.
To start and stop capturing image is the same way as AcquisitionControl.
Please refer to [Camera streaming functions] in [TeliCamAPI Library manual] and
[GrabStreamSimple] sample code in your TeliCamSDK install folder.
8. Execute software trigger.
Write [8] to 'Value' field of 'SoftwareTrigger' register to execute Software trigger..
9. Receive Image
10. Stop and Close image stream.
Copyright © 2018 - 2020 Toshiba Teli Corporation, All rights reserved.
API name
Cam_ReadReg
Cam_WriteReg
92 / 177
Description
Read register value
Write register value
https://www.toshiba-teli.co.jp/en/
DAA00195C