Table of Contents
Advertisement
Configuration
The system configuration of this camera series is as follows;
This camera has no accessories, please prepare other equipment separately.
● Camera:
● Camera mounting kit
CPTBU, CPTBUBG (*1):
● USB3.1 Gen1 Cable (*2):
● USB3.1 Gen1 Interface Card (*2):
● e-CON Cable. (*2):
*1: Optional part. Contact your sales representative for details of option units.
*2: Commercial items.
Copyright © 2018 - 2020 Toshiba Teli Corporation, All rights reserved.
This product.
To fix a camera to a tripod; attach this to the bottom of the camera.
This cable is used to connect the camera to host PC. Please use
a USB3.1 Gen1 cable of Standard A - Micro B. This product is
able to connect a USB cable equipped with screw lock
mechanism. Please use it as needed.
This is the interface card to connect to the camera. Usually this
card is installed to expansion slot of PC etc.
This cable is used to input external trigger signal and output GPIO
signal.
We recommend using shielded cable, because there is likely to be
affected by the noise depending on the operating environment of
the camera.
14 / 177
DAA00195C
https://www.toshiba-teli.co.jp/en/
Advertisement
Table of Contents
