Toshiba teli BU040M Instruction Manual page 83

Register access API
Control Image Buffer by accessing IIDC2 registers directly.
 ImageBuffer
1. Select an Image Buffer mode.
Write to 'Value' field of 'ImageBufferMode' register to control ImageBufferMode.
2. Open and Start image stream.
To start and stop capturing image is the same way as AcquisitionControl.
Please refer to AcquisitionControl section as well.
3. Read the number of frames in Image Buffer.
Read 'Value' field of 'ImageBufferFrameCount' register.
4. Read Image from Image Buffer.
Write [10] to 'Value' field of 'AcquisitionCommand' register to execute ImageBufferRead.
Please refer to AcquisitionCommand in AcquisitionControl section as well.
5. Receive Image from Image Buffer.
6. Stop and Close image stream.
Copyright © 2018 - 2020 Toshiba Teli Corporation, All rights reserved.
API name
Cam_ReadReg
Cam_WriteReg
82 / 177
Description
Read register value
Write register value
https://www.toshiba-teli.co.jp/en/
DAA00195C