Declaration Of Incorporation Of Partly Completed Machinery - HBS A 12-FL Operating Manual

Declaration of Incorporation of partly completed Machinery

to Directive 2006/42/EC, Annex II 1 B
(Original Declaration of Incorporation)
Herewith the manufacturer
HBS Bolzenschweiss-Systeme GmbH & Co. KG
Felix-Wankel-Strasse 18
P.O. Box 13 46
85221 Dachau
GERMANY
Phone
Fax
declares for the following product
Machine information: Stud welding gun
Type:
Order No:
Serial No:
Year of manufacture: 2018
that the following essential requirements of the above mentioned Directive – including chan-
ges to the Directive to be applied at the moment of this declaration – were applied and fulfilled:
Annex I, Article 1, 1.1.2, 1.1.3, 1.1.5, 1.1.6, 1.1.7, 1.2.1, 1.2.2, 1.2.3, 1.2.4.1, 1.2.6,
1.3.1, 1.3.2, 1.3.3, 1.3.4, 1.3.7, 1.3.8, 1.3.9, 1.4.1, 1.4.2.1, 1.5.1, 1.5.2, 1.5.4, 1.5.5,
1.5.6, 1.5.8, 1.5.10, 1.5.11, 1.5.15, 1.5.16, 1.6.1, 1.6.2, 1.6.3, 1.6.4, 1.7.1.1, 1.7.2,
1.7.3, 1.7.4,
that special technical documentation was compiled in accordance with Part B of Annex VII of
the above mentioned regulation and will be transmitted, in response to a reasoned request by
the national authorities as follows:
The above mentioned documents will be transmitted by e-mail as a data file in
German language.
that this partly completed machinery must not be put into service until the final machinery
into which it is to be incorporated has been declared in conformity with the provisions of the
Directive, where appropriate.
that this incomplete machine complies with corresponding regulations of the following additi-
onal EU Directives, including any changes to be applied at the moment of this declaration:
„Electromagnetic compatibility" 2014/30/EU
Protection targets of the low voltage regulation were kept to appendix I, no. 1.5.1 of the
machine regulation.
Persons who are based in the European community and who are authorised to compile the
technical documentation:
Name: Heike Otto
Dachau, 02.01.2018
Place of issue, Date
©HBS Bolzenschweiss-Systeme GmbH & Co. KG
All rights reserved – Reprinting, in whole or in part, only with the approval of the manufacturer
Declaration of Incorporation of partly completed Machinery
+49 8131 511-0
+49 8131 511-100
A 12-FL
93-20-260 or 93-20-26010
93-20-260/182XXXX or 93-20-26010/182XXXX
Address: see manufacturer
Gregor Gröger (General Manager HBS)
31